Willo Labs: How to Pair a Course the First Time You Access the LTI Tool in Willo Labs

The first time you integrate JoVE content into your course, you need to pair the JoVE course material with your course, which means connecting the JoVE content you have adopted with the course you are teaching. Here is a step-by-step guide about it.

🎓 Canvas

1. Open your Canvas course
2. Go to the Modules section
3. Create a new module or choose an existing one
4. Click the "+" (Add) button inside the module
5. Select External Tool
6. Choose Follett Discover or Willo Labs
7. Click "Continue in a new window"
8. You should see the JoVE material you have adopted listed, as displayed below:
9. Select the JoVE material you have adopted and click "Pair course":

10. Your course is paired, and you can follow the steps in this article to integrate content.

🎓 Blackboard

1. Open your Blackboard course
2. Go to Content or Content Area in the course menu
3. Click Build Content
4. Select Follett Discover or Willo Labs from the list of tools
5. Select JoVE from the list of available publishers (when applicable)
6. Click "Continue in a new window"
7. You should see the JoVE material you have adopted listed, as displayed below:
8. Select the JoVE material you have adopted and click "Pair course":

10. Your course is paired, and you can follow the steps in this article to integrate content.

🎓 Blackboard Ultra

1. Open your Blackboard Ultra course
2. In the left menu, go to Content
3. Click the "+" button where you want to add the content
4. Select Content Market
5. Choose Follett Discover or Willo Labs from the list of tools
6. Select JoVE from the list of available publishers (when applicable)
7. Click "Continue in a new window"
8. You should see the JoVE material you have adopted listed, as displayed below:
9. Select the JoVE material you have adopted and click "Pair course":

10. Your course is paired, and you can follow the steps in this article to integrate content.

🎓 Moodle

1. Open your Moodle course
2. Turn editing on
3. Click "Add an activity or resource" in the section you want
4. Choose External Tool
5. In the configuration screen, select the pre-configured tool (Follett/Willo Labs)
6. Click "Continue in a new window"
7. You should see the JoVE material you have adopted listed, as displayed below:
8. Select the JoVE material you have adopted and click "Pair course":

10. Your course is paired, and you can follow the steps in this article to integrate content.

🎓 Brightspace (D2L)

1. Open your Brightspace course
2. Go to the Content section
3. Choose the module where you want to add JoVE content
4. Click Add Existing
5. Select Follett Discover or Willo Labs
6. Click "Continue in a new window"
7. You should see the JoVE material you have adopted listed, as displayed below:
8. Select the JoVE material you have adopted and click "Pair course":

10. Your course is paired, and you can follow the steps in this article to integrate content.